\item[Expander] which is a down arrow on the right side, is for viewing more options on the patchbay and for viewing the effects represented on the track. You can just click on the expander to expand or collapse the patchbay and the track. If it is pointing sideways, the track is collapsed. If it is pointing down, the track is expanded. Existing effects appear below the media for the track.
\end{description}
-<<<<<<< HEAD
-=======
\noindent Below the textbox name are several toggles referred to as \textit{attributes} for different features (currently there are 5 as shown in figure~\ref{fig:patchbay01}). If the toggle button is shadowed by a color, the feature is enabled . If the toggle is the background color of most of the window, it is disabled. Click
on the toggle to enable/disable the feature.
->>>>>>> einhander
\begin{wrapfigure}[17]{O}{0.4\linewidth}
\vspace{-2ex}
\centering
\label{fig:patchbay}
\end{wrapfigure}
-<<<<<<< HEAD
-Below the textbox name are several toggles referred to as \textit{attributes} for different features (currently there are 5 as shown in figure~\ref{fig:patchbay}).
-
-If the toggle button is shadowed by a color, the feature is enabled . If the toggle is the background color of most of the window, it is disabled. Click on the toggle to enable/disable the feature.
-=======
-
->>>>>>> einhander
-
Several mouse operations speed up the configuration of several tracks at a time. Click on an attribute and drag the cursor across adjacent tracks to copy the same attribute to those tracks. Hold down Shift while clicking a track's attribute to enable the attribute in the current track and toggle the attribute in all the other tracks. Or you can:
\begin{enumerate}
\paragraph{Split --- blade cut and hard edges:} You can cut the tracks into 2 pieces on the timeline by putting the hairline cursor on the place you want to do a cut and then using the character “x” or the scissors tool (figure~\ref{fig:cut}).
-<<<<<<< HEAD
-\begin{wrapfigure}[16]{O}{0.3\textwidth}
-=======
\begin{wrapfigure}[16]{O}{0.3\linewidth}
\vspace{-1ex}
->>>>>>> einhander
\centering
\includegraphics[width=0.9\linewidth]{images/cut.png}
\caption{Blade cut}
\begin{itemize}
\item Do your editing as usual on the timeline until you are ready to see what is used or unused.
-<<<<<<< HEAD
- \item Make sure you are in Preview mode in the Resources window; you enable this mode using the menu
- \textit{Full play} to the left of the word Search \quad
- \includegraphics[height=\baselineskip]{images/fullplay.png}.
- \item Middle mouse click on a thumbnail in the Resources window and a popup occurs of that media with a
- white colored bar at the top and a red colored bar at the bottom with black sections.
-=======
\item Make sure you are in any of the Preview modes in the Resources window; you enable the mode using the pulldown to the left of the word Search. The option looks like this
\quad \includegraphics[height=\baselineskip]{images/fullplay.png}. \item Middle mouse click on a thumbnail in the Resources window and a popup occurs of that media with a
white colored bar at the top and a red colored bar at the bottom with black sections.
->>>>>>> einhander
\end{itemize}
The red/white bars represent the presence and the black sections represent the absence of where that media is used on the timeline. To get to a bigger representation, use the “f” key for a full screen. Now
\item[Edge Left / Right] moves the edge of the clips.
\item[No effect] no changes are made. You might want to use this choice to prevent accidental movements.
\end{description}
-<<<<<<< HEAD
-The next two tables displays the options and results with the Key Table here first.
-
-\vspace{1ex}
-\noindent s = src media start\\
-p = proj position \\
-l = length \\
-c = cut distance \\
-rest == p+=c: for rest of clips \\
-01 = flags edits\_moved, rest\_moved
-
-{\small
-\begin{verbatim}
- drag left drag right
-curr s+=c,l-=c; +rest < > ... rest
-+-------------+ all left +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +abc|012345|xyz++abc|2345|xyz+
-+-------------+ 11 +-------------+ +-------------+
-curr l+=c; +rest < > ... rest
-+-------------+ ripple right +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +abc|1234|xyz+ +abc|123456|xyz+
-+-------------+ 01 +-------------+ +-------------+
-
-prev l+=c; curr ps+=c,l-=c < >
-+-------------+ roll left +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +ab|012345|xyz+ +abcd|2345|xyz+
-+-------------+ 00 +-------------+ +-------------+
-|curr l+=c; next ps+=c,l-=c < >
-+-------------+ roll right +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +abc|1234|wxyz+ +abc|123456|yz+
-+-------------+ 00 +-------------+ +-------------+
-
-s-=c < >
-+-------------+ slip left +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +abc|23456|xyz+ +abc|01234|xyz+
-+-------------+ 10 +-------------+ +-------------+
-s-=c < >
-+-------------+ slip right +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +abc|23456|xyz+ +abc|01234|xyz+
-+-------------+ 10 +-------------+ +-------------+
-
-prev l+=c; curr p+=c; next ps+=c,l-=c < >
-+-------------+ slide left +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +ab|12345|wxyz+ +abcd|12345|yz+
-+-------------+ 10 +-------------+ +-------------+
-prev l+=c; curr p+=c; next ps+=c,l-=c < >
-+-------------+ slide right +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +ab|12345|wxyz+ +abcd|12345|yz+
-+-------------+ 10 +-------------+ +-------------+
-
-curr s-=c,l+=c; +rest < > ... rest
-+-------------+ edge left +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +abc|2345|xyz+ +abc|012345|xyz+
-+-------------+ 11 +-------------+ +-------------+
-curr l+=c; +rest < > ... rest
-+-------------+ edge right +-------------+ +-------------+
-+abc|12345|xyz+ ---------------> +abc|1234|xyz+ +abc|123456|xyz+
-+-------------+ 01 +-------------+ +-------------+
-\end{verbatim}
-}
-=======
The next table displays the options and results with the Key Table here first.
\begin{lstlisting}[language=bash]
\caption{The 5 types of Trim: note the different lengths of the results.}
\label{fig:trim-color}
\end{figure}
->>>>>>> einhander
\paragraph{How to do a J-cut or L-cut} A J-cut is a split edit film editing technique in which the audio from a following scene overlaps the picture from the preceding scene, so that the audio portion of the later scene starts playing before its picture as a lead-in to the visual cut. An L-cut is a different split edit film editing technique in which the audio from preceding scene overlaps the picture from the following scene, so that the audio cuts after the picture, and continues playing over the beginning of the next scene (figure~\ref{fig:j-cut}). To do either a J-cut or an L-cut, you first shorten the first or second video a little. Then you block the audio tracks from changing by disarming the appropriate tracks. Finally use \textit{One Edit (roll)} the cutting edge off the videos. Moving to the right creates a J-cut and moving to the left creates an L-cut.
\begin{figure}[htpb]
\paragraph{Cutting/Snapping edits} cuts from an edit handle to the insert point.
There are Edit Panel buttons which normally are used to move to the previous or next edit handle/label.
-<<<<<<< HEAD
-
-\begin{wrapfigure}[8]{O}{0.3\textwidth}
- \vspace{-2ex}
- \centering
- \includegraphics[width=0.99\linewidth]{images/snap.png}
-=======
\begin{wrapfigure}[5]{r}{0.2\linewidth}
\vspace{-1ex}
\centering
\includegraphics[width=0.7\linewidth]{images/snap.png}
->>>>>>> einhander
\end{wrapfigure}
-
They look like tags and the letter E on the menu bar and are oriented forward/backward. These same buttons can be used to \textit{cut} from the insert pointer to the previous or next edit/label when the \texttt{ctrl+alt} keys are both pressed when the buttons are used. They \textit{snap} off the media instead of doing the standard re-positioning. This is useful to minimize the number of operations necessary to cut between edits/labels.
Instead of using the edit panel buttons, you can more easily use the following keyboard shortcuts to perform the same functions:
\begin{center}
\begin{tabular}{l l l}
-<<<<<<< HEAD
- \toprule
- snap\_right\_edit & ctrl+alt+ '.' \\
- snap\_left\_edit & ctrl+alt+ ',' \\
-=======
\toprule
snap\_right\_edit & ctrl+alt+ '.' & \\
snap\_left\_edit & ctrl+alt+ ',' & \\
->>>>>>> einhander
snap\_right\_label & ctrl+alt +shift '.' & shift+period is the > sign on US keyboards \\
snap\_left\_label & ctrl+alt +shift',' & shift+comma is the < sign on US keyboards \\
\bottomrule
\begin{lstlisting}[language=Bash]
Bus 003 Device 002: ID 0b33:0030 Contour Design, Inc. ShuttlePro v2
\end{lstlisting}
-<<<<<<< HEAD
- \item To make sure you have usbmon installed keyin:
-\begin{lstlisting}[language=Bash]
-$ sudo modprobe usbmon
-\end{lstlisting}
- \item Next keyin the following:
-=======
\item To make sure you have usbmon installed key in:
\begin{lstlisting}[language=Bash]
$ sudo modprobe usbmon
\end{lstlisting}
\item Next key in the following:
->>>>>>> einhander
\begin{lstlisting}[language=Bash]
$ sudo od -tx1 /dev/usbmon3
\end{lstlisting}
\noindent When done, you will have to Ctrl-C to get out of the program.
-<<<<<<< HEAD
-\paragraph{Note 4} For developers, it is also possible to do the following for further in depth testing:
- \begin{lstlisting}[language=Bash]
-# to locate numerical value of the shuttle, e.g. 0003:0B33.0030.0006
-$ ls /sys/kernel/debug/hid
-$ cat “/sys/kernel/debug/hid/0003:0B33.0030.0006/rdesc” # substitute your own numerical value
-$ cat “/sys/kernel/debug/hid/0003:0B33.0030.0006/events” # press keys to see the results
- \end{lstlisting}
-=======
\paragraph{Note 4} For developers, if you have a pre-UEFI Secure Boot kernel it is also possible to do the following for further in depth testing:
\begin{enumerate}
\item \texttt{cat “/sys/kernel/debug/hid/0003:0B33.0030.0006/rdesc” \# substitute your own numerical value}
\item \texttt{cat “/sys/kernel/debug/hid/0003:0B33.0030.0006/events” \# press keys to see the results}
\end{enumerate}
->>>>>>> einhander
\subsection{Shuttle key default arrangement for Cinelerra / Composer / Viewer:}%
\label{sub:shuttle_key_default_cinelerra}
-<<<<<<< HEAD
-The following is the default setting for the ShuttlePROv2 and ShuttleXpress:
-
-\vspace{1ex} \textbf{ShuttlePROv2:}
-
-\begin{figure}[H]
- \centering
- \includegraphics[width=1.0\linewidth]{images/shuttle-prov2.png}
-\end{figure}
-=======
The following is the default setting for the ShuttlePROv2 and ShuttleXpress (table~\ref{tab:shuttleprov2} and table~\ref{tab:xpress}):
->>>>>>> einhander
\begin{landscape}
\begin{table}[htpb]
\end{landscape}
-<<<<<<< HEAD
-\begin{figure}[H]
- \centering
- \includegraphics[width=1.0\linewidth]{images/xpress.png}
-\end{figure}
-=======
->>>>>>> einhander
\section{Single File Rendering}%
\label{sec:single_file_rendering}
-<<<<<<< HEAD
-\noindent Use the File pulldown and select Render to start the render dialog (figure~\ref{fig:render}). Then choose the desired parameters.
-=======
Use the File pulldown and select Render to start the render dialog (figure~\ref{fig:render}). Then choose the desired parameters.
->>>>>>> einhander
\begin{figure}[htpb]
\centering
\item[EDL:] the path and filename of the source EDL for the batch job.
\item[Elapsed:] the amount of time taken to render the batch if finished. If field is empty, it did not run.
\end{description}
-<<<<<<< HEAD
-
-\noindent To start rendering from the first enabled batch, hit \texttt{Start}. Once rendering, the main window shows the progress of the batch. After each batch finishes, the elapsed column in the batch list is updated and the next batch is rendered until all the enabled batches are finished. The currently rendering batch is always highlighted red. To stop rendering before the batches are finished without closing the batch render dialog, hit \texttt{Stop}. To stop rendering before the batches are finished and close the batch render dialog, hit \texttt{Close}. Or you can exit the batch render dialog whether or not anything is being rendered, by hitting \texttt{Close}.
-=======
To start rendering from the first enabled batch, hit \texttt{Start}. Once rendering, the main window shows the progress of the batch. After each batch finishes, the elapsed column in the batch list is updated and the next batch is rendered until all the enabled batches are finished. The currently rendering batch is always highlighted red. To stop rendering before the batches are finished without closing the batch render dialog, hit \texttt{Stop}. To stop rendering before the batches are finished and close the batch render dialog, hit \texttt{Close}. Or you can exit the batch render dialog whether or not anything is being rendered, by hitting \texttt{Close}.
->>>>>>> einhander
You can automate Cinelerra batch renders from other programs. In the batch render dialog, once you have created your list of batch render jobs, you can click the button \texttt{Save Jobs} and choose a file to save your batch render list to. Once you have created this file, you can start up a batch render without needing to interact with the Cinelerra user interface. From a shell prompt, from a script, or other program, execute:
run them more than once, it is beneficial to save the jobs for later use so you easily run them again.
\item[Load Jobs] reload a previous set of saved jobs. This can come in handy if you did not have the
time to render them when you originally set them up, if you need to rerun, or if you got interrupted.
-<<<<<<< HEAD
- \item[warn if jobs/session mismatched] After you set up your render and press Start, the
-=======
\item[warn if jobs/session mismatched]
\todo{First char should be capitalised}%
After you set up your render and press Start, the
->>>>>>> einhander
program checks to see if the current EDL session matches your Batch Render job. If the EDL has
been changed since the batch job was created, it warns you so that you have the opportunity to
\textit{Save to EDL} path to record those changes. Otherwise, you can dismiss that warning box, disable
\begin{itemize}
\item check the \texttt{Use render farm} box;
\item in the Hostname box, keyin your hostname or ip address such as $192.168.1.12$ or \texttt{localhost};
-<<<<<<< HEAD
- \item enter in a port number such as $401-405$ or $1025$ and click on \texttt{Add Nodes};
- \item you will see something like the following in the Nodes listbox to the right:
- \begin{lstlisting}[language=bash]
- On Hostname Port Framerate
- X 192.168.1.12 401 0.0
- X 192.168.1.12 402 0.0
- X 192.168.1.12 403 0.0
- X 192.168.1.12 404 0.0
- X 192.168.1.12 405 0.0
- X localhost 406 0.0
- X localhost 407 0.0
- \end{lstlisting}
-=======
\item enter in a port number such as $401-405$ (only a root user can use privileged ports) or $1025$ and click on \texttt{Add Nodes};
\item you will see something like the following in the Nodes listbox to the right:
\begin{tabular}{lllc}
X & localhost & 406 & 0.0 \\
X & localhost & 407 & 0.0 \\
\end{tabular}
->>>>>>> einhander
\item set the Total number of jobs to create;
\item click OK on the bottom of the Preferences window.
\end{itemize}
\item On the client computers ($192.168.1.12$), start 5 background cinelerra tasks via:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- cd /{path_to_cinelerra}
- cin -d 401
- cin -d 402
- …
- cin -d 405
- \end{lstlisting}
- \item On the master node (localhost), start the 2 background cinelerra tasks via:
- \begin{lstlisting}[language=bash]
- cd /{path_to_cinelerra}
- cin -d 406
- cin -d 407
-=======
$ cd /{path_to_cinelerra}
$ cin -d 401
$ cin -d 402
$ cd /{path_to_cinelerra}
$ cin -d 406
$ cin -d 407
->>>>>>> einhander
\end{lstlisting}
\item When your video is ready, setup a render job via \texttt{File $\rightarrow$ Render} or \texttt{File $\rightarrow$ Batch Render} and check \texttt{OK}.
\item The results will be in the shared file path / filename that you selected in the render menu with the
\item On each of the computers, install the nfs software if not already installed. For example, on Debian 9
you will need to run: (be sure to check/verify before using any command line):
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- apt-get install nfs-kernel-server
-=======
$ apt-get install nfs-kernel-server
->>>>>>> einhander
\end{lstlisting}
\item On the computer that contains the disk storage to be shared, define the network filesystem. For
example to export \texttt{/tmp}, edit the \texttt{/etc/exports} file to add the following line:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- /tmp 192.168.1.0/24(rw,fsid=1,no_root_squash,sync,no_subtree_check)
- \end{lstlisting}
- \item Next reset the exported nfs directories using:
- \begin{lstlisting}[language=bash]
- exportfs -ra
- \end{lstlisting}
- and you may have to start or restart nfs:
- \begin{lstlisting}[language=bash]
- systemctl restart nfs
-=======
192.168.1.0/24(rw,fsid=1,no_root_squash,sync,no_subtree_check)
\end{lstlisting}
\item Next reset the exported nfs directories using:
and you may have to start or restart nfs:
\begin{lstlisting}[language=bash]
$ systemctl restart nfs
->>>>>>> einhander
\end{lstlisting}
\item Each of the render farm computers must mount the exported nfs target path. To see the exports
which are visible from a client, login as root to the client machine and keyin:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- showmount -e <ip-addr> #using the ip address of the storage host
-=======
$ showmount -e <ip-addr> #using the ip address of the storage host
->>>>>>> einhander
\end{lstlisting}
\item to access the host disk storage from the other computers in the render farm, mount the nfs export on
the corresponding target path: (be sure to check/verify before using any command line):
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- mount -t nfs <ip-addr>:/<path> <path>
-=======
$ mount -t nfs <ip-addr>:/<path> <path>
->>>>>>> einhander
\end{lstlisting}
where \texttt{<path>} is the storage host directory, and \texttt{<ip-addr>} is the network address of the storage host.
Because all of the computers must have the same directory path, create that same directory path with the same uid/gid/permissions on each storage client computer ahead of time.
\item To make this permanent across reboots on the client nodes, add the following line to \texttt{/etc/fstab}:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- {masternode}:/nfsshare /mnt nfs defaults 0 0
-=======
{masternode}:/nfsshare /mnt nfs defaults 0 0
->>>>>>> einhander
\end{lstlisting}
You can make this permanent on the disk storage host BUT the command lines shown, which were
correct in January 2018 on Fedora, may be different for your operating system or in the future. In
addition if your network is not up, there may be numerous problems. If you make a mistake, your
system may not boot. To make permanent, add the following line to \texttt{/etc/fstab}:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- 192.168.1.12:/tmp /tmp nfs rw,async,hard,intr,noexec,noauto 0 0
-=======
192.168.1.12:/tmp /tmp nfs rw,async,hard,intr,noexec,noauto 0 0
->>>>>>> einhander
\end{lstlisting}
You will still have to mount the above manually because of the \textit{noauto} parameter but you won’t
have to remember all of the other necessary parameters. Depending on your expertise level, you can
Later, to remove access to the storage host filesystem:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- umount <path>
-=======
$ umount <path>
->>>>>>> einhander
\end{lstlisting}
Be aware that you may have to adjust any security or firewalls you have in place. \textit{Most firewalls will require extra rules to allow nfs access}. Many have built-in configurations for this.
number that you want to use in the Port textbox. You can make sure a port number is not already in
use by keying in on the command line:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- netstat -n -l -4 --protocol inet
-=======
$ netstat -n -l -4 --protocol inet
->>>>>>> einhander
\end{lstlisting}
Next, click on the \texttt{Add Nodes}
button and then you will see that host appear in the Nodes list box to the right. The \texttt{X} in the first
\item[Create Workflow] While working on the master computer, it is recommended that you keep all the resources being used on the same shared disk. Load your video/audio piece and do your editing and preparation. Add any desired plugins, such as a Title, to fine-tune your work. You want to make sure your video is ready to be rendered into the final product.
\item[Start the Client Nodes] To start up the client nodes run Cinelerra from the command line on each of the client computers using the following command:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- /{cinelerra_pathname}/cin -d [port #] ; \#for example /mnt1/bin/cinelerra -d 401
- \end{lstlisting}
- This starts cinelerra in command prompt mode so that it listens to the specified port number for commands from the master node for rendering. When you start each of the clients up, you will see some messages scroll by as each client is created on that computer, such as:
- \begin{lstlisting}[language=bash]
- RenderFarmClient::main_loop: client started
- RenderFarmClient::main_loop: Session started from 127.0.0.1
- \end{lstlisting}
- As it completes its jobs, you will should see:
- \begin{lstlisting}[language=bash]
- RenderFarmClientThread::run: Session finished
- \end{lstlisting}
- A quick way to start a sequence of clients is to use:
- \begin{lstlisting}[language=bash]
- or n in `seq 1501 1505`; do cin -d $n; done
-=======
/{cinelerra_pathname}/cin -d [port #] ; \#for example /mnt1/bin/cinelerra -d 401
\end{lstlisting}
This starts cinelerra in command prompt mode so that it listens to the specified port number for commands from the master node for rendering. When you start each of the clients up, you will see some messages scroll by as each client is created on that computer, such as:
A quick way to start a sequence of clients is to use:
\begin{lstlisting}[language=bash]
or n in `seq 1501 1505`; do cin -d $n; done
->>>>>>> einhander
\end{lstlisting}
\item[Render Using Render Farm] After you have followed the preceding steps, you are ready to use the render farm. Click on File $\rightarrow$ Render\dots which opens the render dialog. The most important point here is to use for \texttt{the Output path / Select a file to render to} a path/file name that is on the shared volume that is also mounted on the clients. Click on \texttt{OK} to render. The cinelerra program divides the timeline into the number of jobs specified by the user. These jobs are then dispatched to the various nodes depending upon the load balance. The first segment will always render on the master node and the other segments will be farmed out to the render nodes. Batch Rendering, as well as BD/DVD rendering, may use the render farm. Each line in the batchbay can enable/disable the render farm. Typically, video can be rendered into many file segments and concatenated, but normally audio is rendered as one monolithic file (not farmed).
\end{itemize}
\item On each buddy client, create a job for each port:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- /{cinelerra_pathname}/cin -d port#
-=======
/{cinelerra_pathname}/cin -d port#
->>>>>>> einhander
\end{lstlisting}
\item On the master, bring up the render menu and name the output files, for example \texttt{/tmp/myoutput.mp4}.
\item The client nodes output results will be on their local \texttt{/tmp} filesystems so you will have to again use
in the Nodes listbox. Check the \texttt{X} to disable it which sets \texttt{On} to \texttt{Off}.
\item A red message in the lower left hand corner of the main timeline that reads \textit{Failed to start render
farm} often means that the client cinelerra programs were not started up.
-<<<<<<< HEAD
- \item A message of \texttt{RenderFarmWatchdog::run 1 killing server thread \#address\#} means that the client did
-=======
\item A message of \texttt{RenderFarmWatchdog::run 1 killing server thread \\ \#address\#} means that the client did
->>>>>>> einhander
not respond in time. You can adjust the timer in Settings $\rightarrow$ Preferences, Performance tab.
\item When you get the message \texttt{RenderFarmClient::main\_loop: bind port 400: Address already in use}, use a different port.
\item A message of \texttt{RenderFarmServerThread::open\_client: unknown host abcompany} means that the
hostname of abcompany is not in \texttt{/etc/hosts} so you will have to add it or use the ip address instead.
\item There are numerous error messages associated with file \texttt{open/close/status} or problems with the file
that should be dealt with according to what is printed out.
-<<<<<<< HEAD
- \item Other illustrative messages may be shown such as: \texttt{RenderFarmClientThread::run: Session finished}.
-=======
\item Other illustrative messages may be shown such as: \texttt{RenderFarmClientThread:: run: Session finished}.
->>>>>>> einhander
\end{itemize}
\paragraph{Warnings}
\item Set the bitrate to $2600000$ ($2600k$ as in ffmpeg example above).
\item Add the following 2 lines after the first line:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- flags +pass1
- passlogfile /tmp/{temporary log file name}.log
-=======
flags +pass1
passlogfile /tmp/{temporary log file name}.log
->>>>>>> einhander
\end{lstlisting}
Click checkmark \texttt{OK}.
\end{itemize}
\item Click on \texttt{New} to create the second pass job. You will see this second job in the listbox below.
Use the Video wrench and change pass1 to pass2 as follows.
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- flags +pass2
-=======
flags +pass2
->>>>>>> einhander
\end{lstlisting}
\item Click checkmark \texttt{OK}.
\item Click on the \texttt{Start} box and watch it go!
\begin{description}
\item[x265:] add this line:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- x265-params=pass=1:stats=/tmp/{temporary log file name}.log
-=======
x265-params=pass=1:stats=/tmp/{temporary log file name}.log
->>>>>>> einhander
\end{lstlisting}
at the time this document was written, you should see in the output: \texttt{stats-read=2}
\item[libvpx-vp9, xvid, and huffyuv:]
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- cin_stats_filename /tmp/{temporary log file name}.log
- flags +pass1 (or flags +pass2 for the second pass)
-=======
cin_stats_filename /tmp/{temporary log file name}.log
flags +pass1 (or flags +pass2 for the second pass)
->>>>>>> einhander
\end{lstlisting}
\noindent \textit{NOTE:} for vp9, the best Pixels is \texttt{gbrp}
\end{description}
\begin{enumerate}
\item on a terminal window create a named pipe file, for example:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- mknod /tmp/piper.yuv p
-=======
mknod /tmp/piper.yuv p
->>>>>>> einhander
\end{lstlisting}
load your video and do your editing
\item set up your Render (\texttt{Shift-R}), you can choose a raw format such as \textit{yuv} or \textit{rgb}
\item click for \texttt{OK} on the green checkmark.(the cinelerra gui will look like it is hanging while waiting for a command line to use the pipe.)
\item on the terminal window, keyin your command, for example:
\begin{lstlisting}[language=bash]
-<<<<<<< HEAD
- /mnt0/build5/cinelerra-5.1/thirdparty/ffmpeg-3.4.1/ffmpeg -f rawvideo -pixel_format yuv420p \ -video_size 1280x720 -framerate 30000/1001 -i /tmp/piper.yuv /tmp/pys.mov
-=======
/mnt0/build5/cinelerra-5.1/thirdparty/ffmpeg-3.4.1/ffmpeg -f rawvideo -pixel_format yuv420p \ -video_size 1280x720 -framerate 30000/1001 -i /tmp/piper.yuv /tmp/pys.mov
->>>>>>> einhander
\end{lstlisting}
\end{enumerate}
projects / goodguy / cin-manual-latex.git / commitdiff