Multiple GPUs / HW device selection / FFStream decode debugging / nvidea eGPU / VDPAU

Ig0r · 2020-04-12T17:38:01Z

Dear cinelerra community, I came across this great video editor and believe it will be the only one currently supporting my uncommon setup. I use a Lenovo x230 + an external Nvidia GTX970 (so its an eGPU via the expresscard slot). On my current Ubuntu 18.04.4 LTS, the Nvidia-driver-435 proprietary drivers are installed, and work in my opinion properly (e.g. playing some games on Steam fully utilizes the eGPU). Furthermore, playing some mp4 footage from my GoPro Hero 7 (h264 codec) via vlc and mpv works flawless, since they both use VDPAU for hardware acceleration of the GTX970. Here's the output of mpv player: ig0r@ig0r-ThinkPad-X230:~$ mpv --hwdec=vdpau testvideo.MP4 Playing: testvideo.MP4[ffmpeg/demuxer] mov,mp4,m4a,3gp,3g2,mj2: Using non-standard frame rate 59/1(+) Video --vid=1 (*) (h264 2704x1520 59.940fps)(+) Audio --aid=1 --alang=eng (*) (aac 2ch 48000Hz)Using hardware decoding (vdpau).VO: [opengl] 2704x1520 vdpau[yuv420p]AO: [pulse] 48000Hz stereo 2ch float The GPU is fully utilized, the video playback is stunningly flawless, exactly as expected. As far as I can tell, everything is set up properly. In cinelerra in settings/preferences/performance I use VDPAU as a HW device. However, it seems that cinelerra has some troubles decoding the video using this dedicated HW device: ig0r@ig0r-ThinkPad-X230:~$ cinCinelerra Infinity - built: Mar 31 2020 12:53:11git://git.cinelerra-gg.org/goodguy/cinelerra.git(c) 2006-2019 Heroine Virtual Ltd. by Adam Williams2007-2020 mods for Cinelerra-GG by W.P.Morrow aka goodguyCinelerra is free software, covered by the GNU General Public License,and you are welcome to change it and/or distribute copies of it undercertain conditions. There is absolutely no warranty for Cinelerra. RenderFarmClient::main_loop: client startedFFStream::decode: avcodec_send_packet failed.file:/home/ig0r/testvideo.MP4err: Invalid data found when processing inputFFStream::decode: failedHW device init failed, using SW decode.file:/home/ig0r/testvideo.MP4err: Invalid data found when processing inputFFStream::decode: Retry limit This test, of course, is performed with the eGPU connected. Interestingly, when I now change the performance setting to VAAPI (while still the eGPU is connected), no complaints in the console, and the video is played properly in the viewer. It seems to me that my cinelerra does only see the internal Intel onboard "GPU", but not the external one. Now, of course I could just settle with this, but this would just waste a fairly powerful GPU on my setup. Furthermore, I think many people in the future would benefit of this interesting setup. I documented a couple of answers of interesting questions within a similar OpenShot forum. However, they don't seem to care much. Feel free to check it out here, since it might already answer some debugging questions on my setup:I would be very grateful if somebody can help me debugging this issue, since I really look forward in utilizing the eGPU while video editing. I'm happy to follow up on any questions or document this issue further. It might be as simple as changing something like the "GPU number" inside some settings, or I just miss the obvious here, but searching the forum and google did not help so far. I wish you all the best in those difficult times! Cheers!

Pagina 5 / 5 Precedente

Everything else

Ultimi post di Sam 5 anni fa

61 Post

6 Utenti

0 Reactions

35.5 K Visualizzazioni

RSS

Sam

(@sam)

Trusted Member

Registrato: 7 anni fa

Post: 69

04/11/2020 5:11 pm

@Ig0r
Thanks for your feedback. It may take some time until Phyllis answers, as she has some private matters to take care of at the moment. We will answer in due course.

RispondiCitazione

Pagina 5 / 5 Precedente

Forum Jump:

Argomento precedente

Prossimo argomento

Attualmente stanno visualizzando questo argomento 2 ospiti.

GIT for cinelerra and cin-manual-latex is available on new server at

You can now read-access and clone the Cinelerra-GG sour...

Di phylsmith2004 , 20 ore fa
Answer to: ugly edges with clips on background

The resolution is native. The foreground imported cli...

Di cincity , 1 giorno fa
Answer to: ugly edges with clips on background

@cincity Is the resolution between the background image...

Di andreapaz , 1 giorno fa
Answer to: ugly edges with clips on background

unsharp and zoom-unsharp do help. Unfortunately the a...

Di cincity , 3 giorni fa
Answer to: ugly edges with clips on background

You probably have the idea for that. I see that alrea...

Di cincity , 4 giorni fa
RE: ugly edges with clips on background

@cincity Suggestion from Andrew-R: May be rendering...

Di phylsmith2004 , 5 giorni fa
ugly edges with clips on background

I have a white 960x480px background where I move clips ...

Di cincity , 5 giorni fa
Answer to: Strange mask behavior when using Alt+J and Alt+U

See also manual "2.1.5 Insertion Point" and "17.2 Playi...

Di andreapaz , 1 settimana fa
RE: Strange mask behavior when using Alt+J and Alt+U

@chapolin Andrew-R suggests: I suspect thi...

Di phylsmith2004 , 1 settimana fa

Icone del forum: Forum con messaggi letti Forum con messaggi non letti

Icone argomento: Senza risposta Con risposte Attivo Hot In evidenza Disapprovato Risolto Privato Chiuso