Hi, I am looking presets rendering for YouTube.
.webm VP9 YouTube Cinelerra, currently it looks bad on youtube.
Many recommend uploading it in the best possible quality.
searching i found this: https://support.google.com/youtube/answer/1722171?hl=en
is it possible to put this in Cinelerra?
https://gist.github.com/mikoim/27e4e0dc64e384adbcb91ff10a2d3678
I'm not sure how to do it in Cinelerra.
Sorry for the late reply and this is not yet a complete answer until I have more time to test further.
Render Menu setup:
1) change File type to "ffmpeg" if not already AND file format to "mp4"
2) click on the Video wrench and then in the Compression box use the arrow on the right side to scroll down to "faststart_h264.mp4"
3) do the same for the Audio wrench, that is choose "faststart_h264.mp4".
These were setup for a user a few years ago for his youtube preferences and at the time they were quite good but I have not rechecked them in a long time so I will look at the URLs you quoted to see how they match.
Were you using File Type of "ffmpeg" and File Format of "youtube" in the Render Menu? If so, use the Video wrench and down arrow on the right side of the Compression box to select "uhd_h264.youtube" AND READ what it says in the box about changing the Audio wrench too.
FYI: the Audio faststart_h264.mp4 as mentioned in the previous note is "aac".
I have now had time to study your url:
https://gist.github.com/mikoim/27e4e0dc64e384adbcb91ff10a2d3678
and it looks like the ffmpeg/mp4 "faststart_h264.mp4" Video and Audio wrench choices should do quite nicely. You can make minor adjustments if you feel that they are needed. Here is the matching url suggestion and what we are using with faststart.
URL suggestion Our faststart_h264.mp4 (you will see settings in bottom)
------------------------ -----------------------------------
c:v libx264 h264 Yes, that is what is being used
-profile:v high profile=high (see this in the Video Preset menu box)
-bf 2 bf=8 (shown in box) YOU CAN CHANGE this to 2
-g 30 Cinelerra is fussy about this and I only "think" that this is the last line of keyint=60 but really just guessing
-crf 18 crf=28 (shown in box) YOU CAN CHANGE this to 18
-pix_fmt yuv420p Yes, that is what is being used (see Pixels box)
You can drive yourself crazy with changing all of the parameters and it takes a lot of understanding of ffmpeg to get them all exactly what you want. However, if you find a particularly good combination (like what the user who gave us the faststart_h264.mp4 one), we can add it so that it is easily available for all.
try this in faststart h264.
looks good.
But I had a problem with the color space.
The workspace was. BT709 + MPEG
At the end cinelerra rendering he ignored the FFMPEG color commands.
The final rendered video was in BT601 + JPEG but with BT709 + MPEG settings.
My solution
Workspace in BT601 + JPEG rendering will be normal.
the FFMPEG commands will work.
crf=18
g=30
maxrate=20000000
bufsize=20000000 I do not know how it works.
preset=veryslow
profile=high
cin_pix_fmt=yuv420p
level=41 I do not know how it works.
bf=2
refs=4 I do not know how it works.
color_primaries=bt709
color_range=mpeg
color_trc=bt709
colorspace=bt709
⬇️I do not know how it works. ⬇️
# use framerate for 1 keyframe/sec, needed for seeks
x264params=cabac=1:me_range=24:bframes=8:keyint=60:keyint_min=25:qpmin=0:qpmax=69:qpstep=4
I am somewhat confused by this statement:
The final rendered video was in BT601 + JPEG but with BT709 + MPEG settings.
When I change the Render Menu settings to include the lines in the box of the Video wrench of: color_primaries=bt709+color_range=mpeg+color_trc=bt709+colorspace=bt709
the rendered result retained BT709 and MPEG of the original input.
Am I understanding correctly that you have good final results that you are happy with?
I went back to do more tests.
to replicate.
Preferences:
workspace: BT709
color range: MPEG
final video was BT601 + MPEG ??? <<<
Rendering does not use colorspace.BT709
But everything was BT709 + MPEG
Original video BT709 + MPEG
workspace was BT709 + MPEG
Additional commands:
color_primaries=bt709
color_range=mpeg
color_trc=bt709
colorspace=bt709
After many renderings I realized that the color was different.
Use workspace: BT601
color range: JPEG
with the color commands.
it will be a result equal to the original video.
I'm still experiencing rendering.
it is very confusing for me.
Could it be considered a Bug?
Restart Cinelerra settings.
FFMPEG mp4
default Audio / Video h264.mp4
Preferences: BT709 + MPEG
YUVA-8bit
All video rendered in BT709 + MPEG
will result. BT601 + MPEG
this is normal?
About: "I'm still experiencing rendering. it is very confusing for me."
Yes, I agree. But the alternative is not enough flexibility.
There are so many options in ffmpeg, which makes it confusing but once you have the results you like, you can just use them. Unfortunately, or actually quite fortunately, so many options provide the different choices for the differences that allow users to choose what they want. The choices that are currently available in CinelerraGG were set up to at least let users get something rendered without having to learn all of the overwhelming possibilities.
About: "Could it be considered a Bug?"
Restart Cinelerra settings.
FFMPEG mp4
default Audio / Video h264.mp4
Preferences: BT709 + MPEG
YUVA-8bit
All video rendered in BT709 + MPEG
will result. BT601 + MPEG
"this is normal?"
It is not a bug. It is normal because when you render and do not specify exact parameter values, it uses what it has as the default for the codec, NOT the values of your original video.
It is not a bug. It is normal because when you render and do not specify exact parameter values, it uses what it has as the default for the codec, NOT the values of your original video.
I understand that.
But putting color parameters.
Settings> preferences> appearance
YUV Color space BT709
YUV Color range MPEG
When rendering the project.
FFMPEG Rendering Ignore the color parameters in all formats.
color_primaries=bt709
color_range=mpeg
color_trc=bt709
colorspace=bt709
FFMPEG will use the default BT.601 + MPEG a different color from the original
Use YUV Color Space BT.709
The color in the Compositor will work.
will become YUV BT.601 in rendering
But mediainfo will be BT.709
Only if this
Settings> preferences> appearance
YUV Color space BT601
YUV Color range JPEG
The color parameters will work.
color_primaries=bt709
color_range=mpeg
color_trc=bt709
colorspace=bt709
the colors will be the same as the original video project.
I'm not sure if it's just me.
But now Cinelerra GG works fine.
Change Workspacecolors before rendering + color parameters.
It will have a normal rendering.
A bit confusing.
But it works fine for me.
Usually, when I make a Project I write a README.txt with some Cinelerra-GG settings for Color Model, Proxy, and Rendering.
Below a little part of my README.txt for a project of mine after several tests time ago (like you).
- Setting Format: 1280x720 (720p) HD @30fps 16/9 YUVA420p Color Model: YUVA-8bit Settings/Preferences/Appearance: Color: - YUV color space: BT709 - YUV color range: MPEG (16-235) - File Format: FFMPEG - webm - Audio: - Preset: vorbis.webm - Bitrate: 128000 (128k) - Quality: -1 - Samples: fltp - Video: - Compression: vp9_1280x720_24or25or30fps.webm - Bitrate: 0 - Quality: -1 - Pixels: yuv420p - Video Options ( * means changed by me): g=30 (*) color_primaries=bt709 (*) color_range=mpeg (*) color_trc=bt709 (*) colorspace=bt709 (*)
I made mistakes with the color space.
I had calibrated the colors in windows 10, 6 months ago.
but don't calibrate it on linux.
https://cinelerra-gg.org/download/CinelerraGG_Manual/Video_attributes.html
Model Color.
Will the composer always be sRGB?
The project looks good on the composer.
The rendering is not something gray.
---------- edit
this helped me a lot.
now I understand things better. 😀
@sparkill It seems like you are learning a lot all on your own.
@andreapaz Has helped explain some things about color management now and in the past as you found in the forum topic you quoted.
Will the composer always be sRGB?
maybe Andrea can answer that as I have not got a clue.
@andreapaz thx 🙂
you have good content.
now use RGBA-8bit color model
rendering in yuv444p
the colors almost the same as the original video,
I have to experiment more.
I use OBS to record my screen.
Use NV12> bt709 > partial (limited mpeg)
it's a great relief.
I was going crazy with the color.